Chinese lunar new year is coming soon. We will be on holidays from 23rd Jan to 2nd Feb. If you want to buy MRT tools, recharge for your account or need technical support, please make arrangements in advance.
Posted by: MRT_Service - 01-05-2017, 07:30 AM - Forum: News
- No Replies
Dear Mrt customer,
MRT international seminar on H.D.D data recovery and laptop M.B repair is going to be held in Tehran in February 16, 2017. This seminar will be held by Iran’s exclusive reseller Informatics Parseh Institute, and assisted by MRT lab. The whole seminar and its special workshops will last for 4 days in February 16-19, 2017 including an opening ceremony, speeches, small workshop, products sales promotion and so on.
Many professionals from China, Italy, Switzerland, United States of America and etc. will attend in this seminar. Experts from MRT lab and Informatics Parseh institute will tell you the working principles of HDDs, some basic skills, practical methods to do data recovery, hard disk drive repair and so on. We believe that, this is an unprecedented seminar for MRT users and we look at this as a success.
We sincerely invite every customer to attend in this international seminar.
MRT lab
E-mail: info@mrtlab.com
Skype: mrtpro@outlook.com
QQ: 939601172
Tel: +86-27-82621261
Hi Guys, the newest English version software is available now; and here is the downloading link:http://us.mrtlab.com/download/
The two different software packages are named as "MRT 161025 English Offline(or Online) Version", if you open it and still see "MRT 160528", you just need to fresh the interface with a F5 click.
MRT software is upgraded to 20160528 version on May 28, 2016. The version number is 2.0.4.9.
The download address of the new English version is http://en.mrtlab.com/download/.
And this version applies to both 2-ports card and 4-ports card.
With continuous product upgrades, MRT tools are more and more powerful. In the past few years, the MRT software has been recognized by China and global market. According to the latest data, the market share of MRT rises to the second in the data recovery industry, only behind Russia product PC3000. We will keep innovating and provide better product and service to customers.
It takes a long time to develop data recovery tool and accumulate the technology. The MRT Lab was founded in 2004 and has become an old brand after ten years of development. The oldest product MRT for DOS, a product to repair Maxtor HDDs, was very popular in the whole industry and the following product MRT WH once deeply influenced the HDD repairing market of Western Digital and Hitachi, which is until now still the first choice to repair Hitachi HDD. When our latest MRT Express/Ultra are introduced to the market, the industry structure is changed and the industrial monopoly is broken. The user can buy the professional data recovery tool with less than half of the usual price. As an old brand, the achievement of MRT lab is closely related to the consistent support of customers. Therefore, we will reward customers with harder effort to create better product!
In the upgrade, the new function of "Mount Disk to OS" is added to the main program. With the function, the HDD connected with MRT card can be mounted to Windows operating system so that it can be identified by the system. Then users can deal with the HDD data with third-party tools such as Winhex，DiskGenius and so on. This function is located in the main menu "Tools - > Mounting current disk". This time, the hardware driver of 2-port card is upgraded, too. Users don’t need to restart the computer any more when they install the driver. It can be used after the installation, which is convenient for users.
Several new functions are added to Seagate F3 utility, such as editing the logic head map in RAM. This function is very useful. As is known to users, ROM editing is necessary when making virtual head by editing head map. Now the head map can be edited in RAM and will take effect immediately. In other words, users can change the head map dynamically when HDD is running. For example, if head 0 is in poor performance, we can edit ROM and disable head 0 and boot hard disk from head 1, then edit RAM and enable head 0 dynamically. Masters must have known what the function means to data recovery. Please pay attention to later detailed tutorial. The interface of modifying area adaptive parameter is also optimized, which is mainly used to repair HDD. The optimized interface becomes easier to operate. The P-list editor is renamed as module 03 editor since module 03 includes not only P-list but also track defect list and Servo defect list. The previous P-list editor can only edit the P-list in module 03, and the track defect list and servo defect list editor are in an additional tool. It will be more convenient for users after the three editors are integrated together.
Part of the latest Seagate HDDs, including DM001 and DM003 series (Triangle circuit board), are set with firmware locks by manufacturers. Users can not enter the diagnosis mode, read or write module and SA, enter the terminal T Level , or they can enter the T Level but only part of the commands can be executed. When these hard disks with firmware locks are damaged, they can’t be repaired because factory-level commands can’t be executed. This time, we add firmware unlock of Seagate HDDs, which can be used to repair part of the Seagate HDDs whose terminal are locked and commands can’t be sent. It should be noted that there are many kinds of firmware lock, the unlock function does not support all HDDs and the unlock methods are different. For now, this function does not support some HDDs and it will support more HDDs in the future. We also add the function of modifying HDD model number of Generation 11 and it support part of Generation 11 HDDs. The function is located in the menu “Tools->Disk repair tools->Modify HDD model”. As is known to us that we cannot modify the model number of Seagate Generation 11 with CAP, so we provide the function of modifying HDD model number of Generation 11. The model number can be modified to any character string but not only preset character string. MRT is the only software that provides this function in the market. The function of shielding heads of Generation 11 HDD is also added. For now, the Generation 11 only support shielding last heads, and the Generation 12 support shielding any head. Next time, we will upgrade the function of head shielding of Generation 11 and notebook hard drive. The head shielding of MRT is realized by modifying servo data. Viewing the zone table with command “x” in Level 2, you can see that the number of head decreases, which means the head shielding of MRT is successful. The heads are not actually shielded if the number of head doesn’t decrease, and that does not mean repairing successfully. Shielding head 0 means to close head 0 totally and write the firmware to head 1 so the HDD will boot from head 1. Otherwise, it doesn’t shield head 0 and redefine the main head successfully. MRT can shield head 0 and write the firmware to the rest good heads when head 0 is damaged or ticking, or when the HDD failed to boot or execute any commands. MRT is the first software that supports head shielding of Generation 12 and is copied by other software. In the next upgrade, we will upgrade the function of head shielding of Generation 11 and notebook hard drive. Our innovation ability will never be copied by other software although they can copy our new functions.
As for Western Digital utility, several useful functions of editing RAM are added. Users can edit module 01, SA range, mode and so on. SA range and module 01 editing in RAM provide a new way of HDD repair. For example, when the disk is busy after loading the LDR, we can edit module 01 address in RAM and load the LDR again, then search the SA and diagnose the malfunction of disk. What’s more, we optimize the the support of self test for HDD with PCB version newer than 1640 version and add the function of viewing the HDD zone allocation, which can be used to view the relevant information about self test.
For Samsung utility, the function of HDD capacity editing has been added, which makes it convenient to edit the HDD capacity. In addition, password checking, SA track erasing and S-list rebuilding are added as well.
As for disk scanning tools, HDD self test, cyclic NOP sending and quick test are also enabled. Standard ATA command will be sent when doing HDD self test, by which we can know the general condition of HDD. And when sending NOP command cyclically, the HDD will do nothing (not reading or writing data) but keep spinning. By quick test function, status of certain LBA can be detected. This function has three modes, mainly including two test methods of getting LBA by average distribution and randomly getting LBA with increasing sequence. This function of quick test can be achieved by flexibly using the two test methods.
Database access setting has been added to database management tools. With this function, specified database can be connected. The function of file and folder search can be used to search the data we want. What’s more, another function, database back-up, can be applied to backup the database.
For Fujitsu utility, module structure test, RAM module reading/writing and SA self-test are added to help users better test the status of HDD firmware.
For more upgrade information, please pay attention to the upgrade log. MRT will keep innovating and bring better product and service to customers!
Chinese traditional New Year is coming soon. We will be on holidays from Feb. 5th to Feb.14th. If you want to buy MRT tools, recharge for your account or need technical support, please make arrangements in advance.
A new version of MRT data recovery software was released on January 16th, 2016. Version number: 2.0.4.7
Download link of English version: http://en.mrtlab.com/downloads/
The software can be used for MRT Pro/Express 2-port card and MRT Ultra 5-port card.
Below is an introduction of 160116 version.
MRT Pro 150930 software version has gained great popularity and been highly acclaimed since it was released. MRT users has witnessed that function of cost-efficient MRT tool is increasingly advanced. Moreover, MRT Lab has offered free upgrade of MRT software for three years among similar software which is charged for upgrade in order to ease burden of MRT users. MRT Lab also try to provide good after-sale service and technical support, including remote technical support and on-site training seminar. MRT technical support is free of charge for most cases recently, besides, MRT Lab has held free ninth training seminar in Chengdu, China in October, 2015. MRT Lab is provider of data recovery tool which offers most training seminars in China with wide range and a large number of attendees. MRT tool for data recovery and disk repair is characterized by powerful function and high quality, unique features and excellent after-sales and technical support, all of which increasingly occupies market of data recovery and disk repair at home and abroad promptly and gains most market share with MRT users support among made-in-China data recovery tools. In order to reward and serve MRT users better, MRT Lab upgrades MRT software to Chinese version 160116 and English version 160116,which originates some blockbuster functions for MRT software.
With 160116 software version, head of Seagate F3 series hard disk can be shielded. Which is originated by MRT Lab and becomes first data recovery tool with function of switching off damaged head for Seagate F3 series. It convincedly demonstrates technology research and development capability of MRT Lab. MRT Lab has released function of Hitachi series hdd head shielding for a few years , which is only data recovery tool for this function in this world. MRT tool can support Seagate ,Western Digital,Hitachi IBM,Hitachi ARM, Toshiba hard disk to shield head until now, which is essential tool for data recovery. Flowchart of Seagate F3 series shielding head is backing-up original ROM-> Backing-up original P-list->Shielding head through editing ROM -> Write New ROM into hard disk-> Format Service Area and Recalculate translator ->Upgrade universal firmware->Write original P-list into hard disk with P-list editing tool->Recalculate translator->Erase whole disk. We will make a video manual in detail for it. Besides, there is practical function in Seagate auxiliary tool for changing ROM,that is head parameter adaptive. which can exchange head adaptive parameter of patient disk to donor disk after changing head of disk. It can extremely increase success rate of changing head. MRT software 160116 version can support more a dozen of hard disk family and more model numbers of hard disk for this function. In order to make better use of this function, MRT software 160116 version improves function of P-list editor. P-list editor no more support opening and saving CHF format file, since P-list of Seagate is module 03 and CHF file can not fully describe data of module 03. Now P-list editor can directly open module 03 and save it as module 03 format, that is RPM file of module backup, so that MRT users can directly save RPM file into disk, which is complete module 03. Moreover, MRT software 160116 version makes an improvement in creating LDR. Old MRT software version can only support LDR file created by MRT tool to be useful in MRT tool , but now MRT tool can create commonly -used LDR file which can be used by any supporting upgrade Seagate Loader software. In addition, revised ROM tool better supports editing head map. Editing physical head map for Seagate hard disk can be used for selective head imaging for hard disk with single damaged head, which is essential for data recovery,and this function can support more family of hard disk.
MRT 160116 software version adds utility for WD hard disk,named WDC Marvell USB, this utility can support WD USB hard disk to read/write firmware. Old MRT version can only support SATA ports, so that USB hard disk needs to be transferred to SATA ports firstly and then can read / write firmware. WDC Marvell USB can directly support USB hard disk to read/write firmware and do utility operation. Moreover, new function of initializing auto self-calibrator environment with one click is added to MRT 160116 software version. To put is simply, It is repairing hard disk with one click . As for old MRT software version, to repairing WD hard disk is complicated , since it needs to cut head and zone or open self-calibrator manually. Function of repairing hard disk with one click can cut head and zone and open self-calibrator automatically, that is to say, System can judge situation of hard disk automatically and judge which head is damaged or which zone has bad sectors and which head and zone needs to be cut and then automatically open self-calibrator function to repair hard disk without human,which can extremely improve efficiency. As for specific description of this function, please focus on concerned manual for it in MRT official website. All of new functions of MRT 160116 software version is available for MRT Pro, MRT Express and MRT Ultra.
In this upgrade, there is great improvement in DE utility. On the basis of MRT software 20150930 version, the copying and file parsing was re-constructed to optimize DE utility for better stability and higher efficiency. For copy task, we optimized the functions “Read from active MRT utility” and “Fill target disk”. The upgraded function are supported by MRT Pro, MRT Express and MRT Ultra. For file parsing, we reconstructed file parsing of DE to optimize some key functions. For saving files, we added the functions of counting numbers and size of file, countdown of file saving time. There are a lot of changes in interface. The function of searching partition was also modified a lot. Users can designate the LBA section to do the search. At the same time, there are “Quick search” and “Full HDD search” for users’ selection. The log interface is also re-designed. The function of searching character was added. Meanwhile, support for Linux OS is added. It supports Linux system files parsing in GPT and Dos partitions. We also optimized timeout settings and the “List” plugin of file parsing interface. In a word, the stability and functionality has been greatly enhanced in this upgrade, user experience is also improved with the optimization of many details.
For other utilities, we added support for many Samsung families. For Hitachi ARM, shielding head function is added. For Toshiba, all functions of MQ series are added for MRT Pro. Support for Hitachi-ARM shielding head and Toshiba MQ family have been added in previous upgrade for MRT Express and MRT Ultra. In this upgrade, the functions are also added for MRT Pro. At present, we will continue upgrading software for MRT Pro and provide users better service. The MRT tools for sale now are MRT Express and MRT Ultra, suitable for different market demands.
To sum up, for users of MRT Pro, MRT Express and MRT Ultra, the newly-upgraded software is worth downloading. MRT Lab will keep on working hard to provide users with better products and services.
MRT Ultra is a new design of MRT Lab launched with brand new framework. Which the first data recovery tool to adopt PCIE2.0 interface in the world. MRT Ultra is dedicated for high quality, high speed and perfect user experience, which can be classified as high-end configuration among MRT tools.
MRT Ultra tool is released now after MRT Lab has taken great effort for more than half a year, which is third generation of MRT tool for data recovery and disk repair. MRT Ultra make a great breakthrough in speed of reading/writing firmware up to 33MByte/s, which was misunderstood to be only 2MB/s at most in industry of data recovery. This high speed is owed to high-end SATA(NCQ) technology researched by MRT Lab,which adopts UDMA method to read/write firmware. MRT Ultra also make a big progress in DE imaging up to 460MByte/s. As for hardware design, it has four SATA ports and one IDE port.
Please see below technical features of MRT Ultra;
1. Provide four SATA ports and one IDE port.
2. Theoretical speed of SATA interface is 600MB/s and measured speed is 460MB/s.
3. Support PCIE version is 2.0 4x.
4. Speed of reading/writing firmware up to 33 MB/s
5. Support 32bit and 64bit Windows operating system
MRT Ultra software version has two version-online version and offline version like MRT Pro and MRT Express. MRT users can get free access to software upgrade at present. Please contact us if you want to upgrade MRT Pro/Express to MRT Ultra.
Below is MRT Ultra SATA controller card.
2015.10.12
A new version of MRT data recovery software was released on September 30th, 2015. Version number: 2.0.4.6
Download link of English version: http://en.mrtlab.com/downloads
The software can be used for MRT Pro/Express 2-port card and MRT Ultra 5-port card.
This is a comprehensive software upgrade. The new version software fully plays the advantages of MRT hardware cards with better stability of software, including 64-bit driver program of 5-port card & 2-port card and DE file parsing aspects etc. Some functions are also upgraded..
There is no change in MRT main utilities and user registration in this upgrade. Users can still use the MrtKey.txt file of older version. While we made some adjustments for driver program, so users need to re-install driver program. We mainly made some adjustments to improve the stability of data transmission for MRT Ultra 5-port card and the mechanism of opening multiple MRT software simultaneously.
We made significant adjustments for DE utility. The most important upgrade in DE is the fully enhancing the data copy speed, which will benefit users of MRT Express and MRT Ultra. There is the menu button “Enable top-speed mode” in DE data copy interface. It supports real-time enabling or disabling in data copy task. This mode is disabled by default. The copy speed will be largely improved when it is enabled. Due to the restrictions of hardware, MRT Pro/Express 2-port card doesn’t support transmission block size as 2016, while you can still use the function “Enable top-speed mode” to improve the speed. Comparing with the previous version, we fix some infrequent bugs, optimize the data parse function, and fix the memory loss problem. There is a user-friendly interface modification that we add the port occupation info of source device and target device on information bar of DE. For user of MRT Ultra 5-port card, it will be a very practical function. There is also adjustment in operation habit. When there is data copy task, users are not allowed to switch to “read from active MRT utility” mode but can only stop the task and then switch. In the same way, when copying in “read from active utility” mode, users cannot make real-time switch to other mode, but have to stop the task first. While the real-time switch of SATAHIGH and other modes will not be affected. Meanwhile, when top-speed mode is enabled, the “Pause” button will be invalid. In addition, we re-factored the underlying logic of DE utility and optimized some function logic. In future upgrade of DE utility, we will consider about adding support for Linux file system and adding the core data recovery functions in Windows system. Our goal is to make the data recovery capability of DE utility more and more close to that of the world’s leading technology. And welcome all MRT users to provide feedback to our products.
There is also a major upgrade for Toshiba module. The new version supports reading/writing firmware in ATA mode for all series of Toshiba. In the family selection panel , there is the option “ATA mode” now. “ATA mode 1” is newly-added. The function of “ATA mode 2” below is the same as before. For new series HDD read in ATA mode, users don’t need to check any mode. For HDD read by terminal COM before, users can check “ATA mode” after selecting family. If reading firmware failed, you can exit and re-enter, then check “ATA mode 2”. These two modes can almost support all Toshiba HDD read by terminal COM. The supported models are more than any similar products.
In MRT WD utility, the function editing RAM head map supports more families. Some functions are also optimized. Please see details in upgrade log .
There are some functions added in ROM programmer tools. It supports 1.8V chip now. Nowadays, the voltage of ROM chip in most Seagate DM003 series is 1.8V, not the commonly-seen 3.3V. Now, the newest ROM programmer tools support selecting chip voltage. If users need to read/write ROM chip of 1.8V, they can go to “Configuration -> Voltage settings” and select corresponding voltage .
Posted by: MRT_Jessica - 09-30-2015, 09:21 AM - Forum: News
- No Replies
MRT Lab held the first data recovery online training course on September 29th, 2015. This session gained active attention from many global applicants after the news was released. Only 20 participants were accepted to ensure the course to be effective and interactive. The participants of the first training session came from Brazil, Kenya, Portugal, Palestine, Colombia, USA, Panama, Iran, Canada, Sri Lanka, Argentina, Turkey, and Poland.
The training topic is ""Identification Failure of Western Digital". It was explained in two parts: "Boot process of West Digital HDD" and "Analysis & solution of identification failure“.
Please be noted we would have Chinese National Holiday from October 1st to October 6th. During this period, we cannot serve you here. If you want to buy MRT Pro, recharge for your account or need technical support, please contact us in advance. Sorry for any inconvenience.
Hi, Guest
![[Image: 2017鸡年.png]](http://en.mrtlab.com/wp-content/uploads/2017/01/2017鸡年.png)
![[Image: 2016.jpg]](http://forum.mrtlab.com/images/images_upload/2016.jpg)
![[Image: MRT Ultra.jpg]](http://forum.mrtlab.com/images/images_upload/MRT Ultra.jpg)
![[Image: tt1.png]](http://forum.mrtlab.com/images/images_upload/tt1.png)
![[Image: tt2.png]](http://forum.mrtlab.com/images/images_upload/tt2.png)
![[Image: tt3.png]](http://forum.mrtlab.com/images/images_upload/tt3.png)
![[Image: tt4.png]](http://forum.mrtlab.com/images/images_upload/tt4.png)
![[Image: tt5.png]](http://forum.mrtlab.com/images/images_upload/tt5.png)
![[Image: tt6.jpg]](http://forum.mrtlab.com/images/images_upload/tt6.jpg)
